Highbay Microwave Sensor Dimmable - LXHB Pro Range

• Power supply -  12-24V DC >50mA
• Dim control output -  0-10V max 25mA sinking current
• H F system - 5.8GHz±75MHz
• Transmission power - <0.2mW
• Detection area - 20%/50%/75%/100% (1-8M)
• Mounting height - Max 15M
• Hold time - 10s/1min/5min/10min/15min/20min/30min/60min
• Light levels  - 24H / 10 Lux / 30 Lux / 50 Lux
• Temperature -  -20°C to +50°C
• IP rating - IP65

The LXHB/MWS/P is a motion sensor that dims lighting from high to low based on movement. This slim, low profile sensor is designed for installation inside the front socket of Luxna PRO High Bay range. These units use microwave sensing technology to react to changes in movement within the coverage area. Once the sensor stops detecting movement and after the time delay elapses, the lights will go from the high to low setting and eventually to an OFF postion if this has been set. Sensors must directly "see" the motion of a person or moving object to detect them, so careful consideration must be given to sensor luminaire placement. Avoid placing the sensor where obstructions may block the sensor's line of sight.